Anticipating an experimental Thanksgiving.

Thanksgiving is this week here in the US, and so we're all busy planning menus, pre-cooking parts of the feast, and inviting family, friends, and people we think may not have anyone to celebrate the holiday with us.

I'm not going to be with family (that's next week), and I'm turning down all well-meaning invitations for Thursday. Nor am I inviting anyone to my place, as I have sometimes done in the past. Why? Because I have a new toy to play with. I took delivery this past week on an induction stove. 

The new stove shows more of my fun backsplash tiles!
Lynne Cantwell 2025

When I bought this apartment, I didn't even think about the ages of the appliances that came with. At least, not until the 35-year-old dishwasher started coughing up things I'd never put into it. It was about that time that I decided to start replacing everything, even the stuff that still worked. I got a new microwave in 2024; somebody had stuck a finger or something through the plastic panel over the clock/timer display on the old one, and it bugged me that I couldn't easily read it. The new fridge I bought last year to replace a 2011 model. I got a new washer and dryer to replace the pair that were manufactured in 1997 when I redid the laundry closet last year.

That left the stove. I liked the old one. It had a 2011 manufacturing date, and it still worked fine, but I've been jonesing for an induction stove -- primarily because it's safer for older folks not to reach across hot burners for the knobs on the back of the stove. Also, induction burners won't get hot, even if the knob is on, unless there's an induction-ready pan on it.

"Induction-ready pan" needs an explanation. Induction works by creating electromagnetic energy. There's a coil of copper wire under the glass stovetop; electricity is sent through it, and when a pan that conducts magnetic energy is set atop the glass over the copper coil, the copper generates a current within the pan itself. Basically (if I've got this right), the pan itself is    ` the heat source. The burner on the stove gets warm, but the pan heats up a lot. So you can't use aluminum pots and pans on this stove -- you have to use something that a magnet will stick to. In other words, your pans need to be stainless steel, carbon steel, cast iron, or certain hybrid pans. Try sticking a magnet to the bottom of your pan -- if it sticks, it'll work on induction.

Induction cooking is fast. The installer had me put a little bit of water inside a pan and put in on the burner; the water inside started boiling within 30 seconds. Granted, it was only a little bit of water, but it seemed whiz-bang fast to me.

It's going to take some adjustment for me to get used to that speed. I've been cooking on an electric stove since the middle of 2018, and I've adapted my cooking style to the slow warmup of regular electric burners. The first time I made an omelet on this new stove, I waited too long to pour in the egg mixture. It didn't quite burn, but it came out extra brown. And induction heats up even faster than gas. 

This stove also has both a regular and convection oven. My microwave has a convection feature, which I've used a couple of times, partly for the novelty of putting an actual metal pan in the microwave -- although the microwave doesn't have a cleaning cycle in case you get grease spatters all over the inside, so it's not as useful as I first thought it would be. The new oven does have a steam-cleaning cycle. And purportedly it will do the regular-to-convection temperature conversion for you; given that I also have to recalculate for altitude, I'm not sure how useful that feature will be. But I'm willing to give it a whirl.

All of which is to explain why I'm not inviting anyone over this Thanksgiving. If I manage to ruin my Thanksgiving dinner, it will only be ruined for me. You're welcome.

***

Oh, my pots and pans? Yeah, I did have to replace them. I had quit using the carbon steel frying pan I first bought because it annoyed me. Instead, I've gone with a couple of hybrid pieces and two nitrided carbon steel frying pans, all made by Anolon. (My favorite aluminum pots were all Anolon.) I am in love with these carbon steel frying pans. Still looking for a saucepan or two.

***

In looking for links for this post, I ran across the saga of my washer and dryer: Best Buy had sold me a vaporware clothes dryer, and I ended up buying the unit from a regional appliance-store chain instead. 

I can laugh about it now. And you can bet I went to the regional chain first for my induction stove. Ordered on Saturday, delivered on Wednesday. Boom.

***

These moments of cooking-with-induction blogginess have been brought to you, as a public service, by Lynne Cantwell.